Bump the dependencies group with 3 updates

[dependabot]

Bumps the dependencies group with 3 updates: github.com/ethereum/go-ethereum, github.com/pressly/goose/v3 and golang.org/x/exp.

Updates github.com/ethereum/go-ethereum from 1.16.8 to 1.17.0

Release notes

Sourced from github.com/ethereum/go-ethereum's releases.

Eezo-Inlaid Circuitry (v1.17.0)

This is a feature release, with all accumulated development from the last 3 months. See below for the highlights.

Note that this release contains multiple critical security fixes, as well as many bug fixes, and is recommended for all users. However, if you are cautious about upgrades, you can also install v1.16.9 which has just the critical security fixes. Specifically, this release fixes CVE-2026-26313, CVE-2026-26314, CVE-2026-26315.

We recommend recreating your p2p node key after installing this update, which you can do by removing the DATADIR/geth/nodekey file before restarting geth. Note this will cause a change in the p2p node ID, which may break static peering setups.

Highlights

Path-based Archive Node with Proofs

The path-based archive node can now serve proofs (via eth_getProof) for the state of older blocks.

You can configure the block range that supports proving independently from other archive state availability. Specifically, you can use the --history.trienode command-line flag to set the amount of blocks for which tree nodes will be tracked.

This feature is disabled by default. Note that state history cannot easily be recovered once deleted, as it can only be generated by processing blocks. However, you can enable trienode history (and/or state history) at any time to turn a full node into a partial archive node, keeping state from that point in time onwards.

#32727, #32621, #33551, #32981, #33399, #32913, #33303, #33584, #33329, #33681, #33103, #33098, #33515, #32247

EraE History Support

Geth now suports the EraE file format, an archival format for post-merge chain history.

#32157, #33827

OpenTelemetry Tracing

OpenTelemetry tracing is now supported by the RPC server, including support for distributed tracing. We have also added some tracing spans for block processing via the engine API, i.e. engine_newPayload.

#33599, #33452, #33780, #33521

All Changes

Geth CLI

• The geth version-check subcommand has been removed. This command checked the geth website for signed vulnerability notices, and would tell if updates are necessary (#33498)
• There is now a --miner.maxblobs command-line flag to set a limit on blobs included in built blocks (#33129, #33302)
• Geth now supports continuous profiling with Grafana Pyroscope (#33623)
• A rare bug that could halt block production in geth --dev mode was fixed (#33146)
• A new --rpc.rangelimit flag configures the maximum block range for eth_getLogs (#33163)
• geth --exitwhensynced will now set the finalized and safe block (#33038)
• geth --ethstats now reports the newPayload processing time to the stats server (#33395)
• A lot of minor issues in Geth's command-line flag processing have been fixed (#33379, #33338, #33330, #32999, #33279, #33252)
• The evm blocktest command can now read filenames from stdin when no path is provided (#32824)

Fork Implementation

... (truncated)

Commits

• 0cf3d3b version: release go-ethereum v1.17.0 stable
• 9b78f45 crypto/secp256k1: fix coordinate check
• c709c19 eth/catalyst: add initial OpenTelemetry tracing for newPayload (#33521)
• 550ca91 consensus/misc: hardening header verification (#33860)
• a4b3898 internal/telemetry: don't create internal spans without parents (#33780)
• 0cba803 eth/protocols/eth, eth/protocols/snap: delayed p2p message decoding (#33835)
• ad88b68 internal/download: show progress bar only if server gives length (#33842)
• c50e5ed cmd/geth, internal/telemetry: wire OpenTelemetry tracing via CLI flags (#33484)
• d8b92cb rpc,internal/telemetry: fix deferred spanEnd to capture errors via pointer (#...
• ac85a6f rlp: add back Iterator.Count, with fixes (#33841)
• Additional commits viewable in compare view

Updates github.com/pressly/goose/v3 from 3.26.0 to 3.27.0

Release notes

Sourced from github.com/pressly/goose/v3's releases.

v3.27.0

What's Changed

Added

• Preliminary Spanner dialect support (#966)

Changed

• Minimum Go version is now 1.25
• SQL migration templates no longer include StatementBegin and StatementEnd annotations. These are only needed for complex statements containing semicolons (e.g., stored procedures). See docs for details.
• Various dependency upgrades

Other

• Added formatting for YDB table names to include folder (#1007)
• Fix tests for StarRocks 3.5 (#1024)
• CI improvements (#1000, #1005, #1008)

Full Changelog: pressly/goose@v3.26.0...v3.27.0

Changelog

Sourced from github.com/pressly/goose/v3's changelog.

[v3.27.0] - 2026-02-22

Added

• Preliminary Spanner dialect support (#966)

Changed

• Minimum Go version is now 1.25
• SQL migration templates no longer include StatementBegin and StatementEnd annotations. These are only needed for complex statements containing semicolons (e.g., stored procedures). See docs for details.
• Various dependency upgrades

Commits

• 7fb1461 release: v3.27.0
• 0b651ba fix: downgrade go directive to 1.25.0 in internal/testing
• aa8e825 build(deps): bump dependencies in internal/testing
• 83743b6 chore: apply go fix modernizations and bump dependencies (#1034)
• 5de4fb4 feat: add dockermanage package (#1029)
• ac97ee0 build(deps): bump github.com/ydb-platform/ydb-go-sdk/v3 from 3.125.1 to 3.126...
• 8a37350 build(deps): bump the gomod group across 1 directory with 2 updates (#1026)
• bab893c Fix tests for StarRocks 3.5 (#1024)
• 26e537d build(deps): bump the gomod group across 1 directory with 5 updates (#1020)
• 7a98c89 docs: update ordering of CLI param help text
• Additional commits viewable in compare view

Updates golang.org/x/exp from 0.0.0-20250911091902-df9299821621 to 0.0.0-20260218203240-3dfff04db8fa

Commits

• See full diff in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore <dependency name> major version will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself)
• @dependabot ignore <dependency name> minor version will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself)
• @dependabot ignore <dependency name> will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself)
• @dependabot unignore <dependency name> will remove all of the ignore conditions of the specified dependency
• @dependabot unignore <dependency name> <ignore condition> will remove the ignore condition of the specified dependency and ignore conditions